德國巴斯夫PBT/ASA  塑膠原料  東莞市順隆塑膠原料有限公司    ULTRADUR   PBT/ASA塑膠原材料

Any use of this information falls under the rules of our

Product Texts

Low-warpage, easy-flowing injection molding grade with 10 % glass fibres for technical parts, for which dimensional stability is very important (eg, housings, plug-and-socket connectors). 

Abbreviated designation according to ISO 1043-1: PBT-ASA-GF10

Rheological properties	Value	Unit	Test Standard
ISO Data
[C] Melt volume-flow rate, MVR	35	cm3/10min	ISO 1133
Temperature	275	°C	-
Load	2.16	kg	-

[C]:

CAMPUS

Mechanical properties	Value	Unit	Test Standard
ISO Data
[C] Tensile Modulus	4500	MPa	ISO 527-1/-2
[C] Stress at break	75	MPa	ISO 527-1/-2
[C] Strain at break	2.9	%	ISO 527-1/-2
[C] Tensile creep modulus, 1h	3500	MPa	ISO 899-1
[C] Tensile creep modulus, 1000h	3300	MPa	ISO 899-1
[C] Charpy impact strength, +23°C	37	kJ/m2	ISO 179/1eU
[C] Charpy impact strength, -30°C	24	kJ/m2	ISO 179/1eU
[C] Charpy notched impact strength, +23°C	4	kJ/m2	ISO 179/1eA

[C]:

CAMPUS

Thermal properties	Value	Unit	Test Standard
ISO Data
[C] Melting temperature, 10°C/min	223	°C	ISO 11357-1/-3
[C] Temp. of deflection under load, 1.80 MPa	105	°C	ISO 75-1/-2
[C] Temp. of deflection under load, 0.45 MPa	190	°C	ISO 75-1/-2
[C] Vicat softening temperature, 50°C/h 50N	150	°C	ISO 306
[C] Coeff. of linear therm. expansion, parallel	55	E-6/K	ISO 11359-1/-2
[C] Burning Behav. at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
Thickness tested	1.6	mm	-
[C] Burning Behav. at thickness h	HB	class	IEC 60695-11-10
Thickness tested	0.8	mm	-

[C]:

CAMPUS

Electrical properties	Value	Unit	Test Standard
ISO Data
[C] Relative permittivity, 100Hz	3.6	-	IEC 60250
[C] Relative permittivity, 1MHz	3.4	-	IEC 60250
[C] Dissipation factor, 100Hz	31	E-4	IEC 60250
[C] Dissipation factor, 1MHz	205	E-4	IEC 60250
[C] Volume resistivity	>1E13	Ohm*m	IEC 60093
[C] Surface resistivity	1E14	Ohm	IEC 60093
[C] Electric strength	39	kV/mm	IEC 60243-1
[C] Comparative tracking index	375	-	IEC 60112

[C]:

CAMPUS

Other properties	Value	Unit	Test Standard
ISO Data
[C] Water absorption	0.4	%	Sim. to ISO 62
[C] Humidity absorption	0.2	%	Sim. to ISO 62
[C] Density	1310	kg/m3	ISO 1183

[C]:

CAMPUS

Material specific properties	Value	Unit	Test Standard
ISO Data
[C] Viscosity number	105	cm3/g	ISO 307, 1157, 1628

[C]:

CAMPUS

Rheological calculation properties	Value	Unit	Test Standard
ISO Data
[C] Density of melt	1090	kg/m3	-
[C] Thermal conductivity of melt	0.165	W/(m K)	-
[C] Spec. heat capacity of melt	2060	J/(kg K)	-
[C] Ejection temperature	160	°C	-

[C]:

CAMPUS

Test specimen production	Value	Unit	Test Standard
ISO Data
[C] Injection Molding, melt temperature	270	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294

[C]:

CAMPUS

Diagrams

Ultradur S 4090 G2 外殼; 工程配件; 連接器 低翹曲性; 尺寸穩定性良好; 良好的流動性
Ultradur S 4090 G4 外殼; 家用貨品; 汽車領域的應用; 電器外殼 優良外觀; 低翹曲性; 收縮性低; 耐化學性良好; 高 ESCR（抗應力開裂）
Ultradur S 4090 G4 BK5110 外殼; 家用貨品; 汽車領域的應用; 電器外殼 優良外觀; 低翹曲性; 收縮性低; 耐化學性良好; 高 ESCR（抗應力開裂）
Ultradur S 4090 G4 High Speed 外殼; 工程配件; 連接器 低翹曲性; 尺寸穩定性良好; 良好的流動性
Ultradur S 4090 G6 外殼; 家用貨品; 汽車領域的應用; 電器外殼 優良外觀; 低翹曲性; 收縮性低; 耐化學性良好; 高 ESCR（抗應力開裂）
Ultradur S 4090 G6 High Speed 外殼; 連接器 低翹曲性; 尺寸穩定性良好; 良好的流動性
Ultradur S 4090 G6 LS High Speed BK15077 低翹曲性; 快的成型周期
Ultradur S 4090 G6X 外殼; 工程配件; 連接器 低翹曲性; 尺寸穩定性良好; 良好的流動性
Ultradur S 4090 GX 外殼; 工程配件; 連接器 低翹曲性; 尺寸穩定性良好; 良好的流動性