點擊圖片查看大圖銅基噴焊合金粉末 Copper-base sprayed welding alloy powder
銅基噴焊合金，是在銅基體中加入B、Si、Ni、Mn、Al、Fe、P等合金元素制成的，具有良好的導熱，導電性和耐蝕性，摩擦系數低，耐粘著摩擦磨損性能優良，易切削，光潔度高。但由于應用面不寬所以銅基粉末品種比較少，下面介紹我公司生產的銅合金粉，建議用戶在使用前應在120℃保溫兩小時低溫爐內烘烤后使用為宜。
Copper-base sprayed welding alloy is produced by adding B, Si, Ni, Mn, Al, Fe and P into the copper base, which has sound heat conduction or electricity conduction performance, being antirust, with low frictional coefficient and sound adhesive friction wear resistance, easy for cutting and being smooth. For the limited applications, the copper-base alloy powder has comparatively fewer types. The following copper-base alloy powder should be dried in the low-temperature stove under 120℃ for two hours before useing.
Copper-base sprayed welding alloy is produced by adding B, Si, Ni, Mn, Al, Fe and P into the copper base, which has sound heat conduction or electricity conduction performance, being antirust, with low frictional coefficient and sound adhesive friction wear resistance, easy for cutting and being smooth. For the limited applications, the copper-base alloy powder has comparatively fewer types. The following copper-base alloy powder should be dried in the low-temperature stove under 120℃ for two hours before useing.
| 型號 | 規格(μm) | 特性簡述 | 主要用途 | 物理性能 | 應用工藝 |
| Tuc1 |
-106/+45 -150/+53 |
而腐蝕、耐磨、收縮系數小撞擊時無火花具有低的摩擦系數和高的減摩性能。 | 低壓閥門密封面以及耐磨金屬間粘著摩擦磨損減摩焊層 |
①HRC12-18 ②熔點850℃-900℃ ③流動性17s/50g ④松裝密度4.4g/cm3 |
氧乙炔噴焊 等離子堆焊 亦可用于氧乙炔等離子噴涂 |
| Tuc2 |
-106/+45 -150/+53 |
具有良好的耐腐蝕，耐磨性，能和焊接性能無鐵磁性沖擊時不產生火花。 |
應用鑄鐵，銅合金基體耐磨減摩焊層。 |
①HB180-240 |
氧乙炔噴焊、噴涂 等離子堆焊、 |
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們原則上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請詳細核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換